Wanpou Resist Agent 40g (Boku-Undo)

Simply dissolve in hot water, write, and then apply ink from the back.
Easily create outlined letters.

How to Dissolve Wanpau
Measure out one level scoop (1g) of Wanpau into the included teaspoon. Add it to 15ml (15 teaspoons) of warm water (approximately 50°C). Stir well with the teaspoon to prevent lumps. Stir well, crushing any small particles. Finish by mixing thoroughly with a brush until no lumps remain.
A 40g bottle will produce approximately 600ml-800ml of liquid.

How to Use Wanpau
? Use Wanpau to draw polka dots or letters on calligraphy paper or gasenshi paper, then let it dry.
? Once dry, slightly dilute the ink or vermilion ink and brush it onto the back of the paper.
? After application, absorb any excess ink with a scrap of recycled paper.
*Wanpau water solution has a low viscosity, so it may bleed depending on the paper quality.
It is difficult to produce lines that do not penetrate well into the paper, so adjust the amount you apply to the brush accordingly.

Precautions
- Store in a dry place and tighten the cap after use.
- After dissolving, use the required amount within the same day.
- Avoid contact with eyes or mouth.
- For use on washi paper only. Do not use for any other purpose.